Free trial appointment: 400-9676-266
National After Sales Hotline: 400-9970-990
In Stock | Customized Solutions | One-stop Package
[Question] What is the introduction of ozone disinfection system?
[Answer] Ozone is generated by the oxygen in the air through high-pressure discharge. The ozone-producing air must be purified and dried in order to improve the efficiency of the ozone generator and reduce corrosion. The front of the ozone generation system is an air purification and drying device, and later it is an ozone generator. The system is arranged as follows: the air compressor sends the air to the cooler, and then it is filtered and purified, and then passed through the 1 ~ 2 silica gel or molecular sieve dryer to dry the air below the dew point (-50 ° C), and finally the ozone occurs The device, through high voltage electricity of 15000 ~ 17000V, generates ozone after discharging in the air.
The concentration of ozone prepared on site using air or oxygen as raw material is between 2% and 10%. Ozone has high corrosive properties. Generally, rubber, most plastics, ordinary steel, copper, and aluminum cannot be used in ozone systems. Available materials mainly include 316 and 305 stainless steel, glass, chlorosulfonated polyethylene synthetic rubber, polytetrafluoroethylene, and concrete.
The above contents are compiled according to the problems encountered by the students in their actual work for reference. If you have any questions, please communicate and correct them in a timely manner.URL of this article: http://tjbg022.com/show.asp?id=77